Agricultural Lighting Solutions for Livestock Sheds and Poultry Houses

Agricultural lighting is sealed LED lighting built for livestock buildings, where luminaires face ammonia, feed dust and high-pressure washdown. OLAMLED supplies IP68 and IP69K LED tubular tri-proof luminaires for cattle sheds, pig houses, sheep sheds and poultry houses.

Why standard luminaires fail in farm buildings

Standard luminaires fail early in farm buildings. Ammonia, hot-water washdown and feed dust drive up replacement costs and downtime.

Corrosive, high-humidity environments

Gases from animal waste attack standard luminaires. The result is more failures, higher replacement costs and longer downtime in cattle sheds, pig houses and poultry houses.

High-pressure washdown

Farm buildings are cleaned with high-pressure water jets. Standard luminaires are not sealed for washdown, so water enters the housing and the fitting fails.

Dust and debris ingress

Feed dust and debris enter standard light fittings. Ingress reduces light output and shortens service life in sheds and feed stores.

Our agricultural lighting solutions: IP68 and IP69K luminaires

Choose IP68 and IP69K luminaires for farm buildings. They withstand high-pressure cleaning and resist ammonia from animal waste. These anti-ammonia, waterproof fittings cover most agricultural lighting needs, except growth and incubation lamps.

IP69K-rated waterproof protection

Engineered to the highest waterproof standard, our luminaires block out dust completely and withstand high-pressure washdowns, delivering reliable, long-lasting performance in the harshest farm conditions.

Withstands hot water washdowns up to 80°C

Farm buildings demand regular high-temperature cleaning and disinfection. Our luminaires withstand hot water washdowns up to 80°C without damage, so hygiene routines never compromise the lighting.

Corrosion-resistant design against ammonia

Animal waste releases corrosive gases such as ammonia, which quickly degrade standard luminaires. Our fittings use anti-corrosive materials and coatings that resist gas exposure and extend service life in active farm buildings.

Superior sealing performance

Our luminaires use advanced multi-layer sealing to keep internal electronics completely dry and clean, even in high-humidity, dust-filled farm buildings. The result is consistent, reliable performance whatever the conditions.

Agricultural lighting videos

LED Tubular Light frosted & transparent

45mm LED Tubular Light

Ø70mm LED Tubular Light | OLAMLED

IP68 IP69K Diamter 80MM | OLAMLED

Where our agricultural lighting is used

Our agricultural lighting is built for every type of farm building, so each space gets the light it needs.

Cattle sheds and dairy parlors

Cattle sheds and dairy parlors are hard on luminaires: high humidity and ammonia degrade them quickly. Our IP69K fittings withstand harsh cleaning, resist corrosion and keep their output year after year.

Sheep sheds

Built for sheep sheds. Our IP69K luminaires block out dust and feed, giving the flock bright, even light for healthy growth.

Pig houses

Pig houses demand robust luminaires. Ours withstand 80°C hot water washdowns and resist corrosion in high-ammonia air, for reliable lighting day after day.

Which luminaire for which farm building?

Match the building to the luminaire, then specify the build options. Every series below is an IP68 / IP69K LED tubular tri-proof luminaire, so all of them withstand ammonia and high-pressure washdown.

Farm building	Main challenge	Series	Options to specify
Cattle shed & dairy parlor	High humidity and ammonia	K80 / K70	316L end caps, suspended, linkable
Pig house	Hot water washdown up to 80°C, high ammonia	K80 / K70	316L end caps, PC or PMMA housing
Poultry house	Feed dust, washdown, lighting control	K70 / K45	Dimmable driver, linkable, surface-mounted
Sheep shed	Dust and feed ingress	K70 / K45	Surface-mounted or suspended
Feed store & general farm building	Dust and humidity	K45	Non-dimmable driver, linkable

The K series LED tubular tri-proof luminaire

LED tubular tri-proof luminaires — K80, K70 and K45 series — are used extensively in farm buildings

The K series is waterproof, dustproof, anti-corrosion and anti-ammonia by design. Each luminaire can be specified on five axes:

Mounting: surface-mounted or suspended
Connection: linkable or non-linkable
End caps: 304L or 316L stainless steel
Housing: PC or PMMA
Driver: dimmable or non-dimmable

Product parameters

Technical Parameters-Diameter:Ø70mm/Ø80mm
Power	20W	30W	40W	60W
Luminous flux	2600-3200lm /Clear	3900-4600lm /Clear	5200-6000lm /Clear	7600-9000lm /Clear
	2200-2800lm/Opal	3300-4000LM/Opal	4400-5300lm/Opal	6600-7800lm/Opal
Dimension	L665×￠80mm	L965×￠80mm	L1265×￠80mm	L1565×￠80mm
Input Voltage	AC220-240V/AC100-277V(for US market)
Power factor( P.F. )	>0.95
Luminous Efficiency	130LM/W (Opal)
	150lm/W (Clear)
LED source	Edison SMD 2835, CRI>80Ra
Lamp body color	Clear/Opal
Metal End Cap color	Stainless steel 304L/316L
Index of protection	IP68/IP69K
Beam angle	120°
Housing material	PC/PMMA
Working temperature	-20°C~+50°C
Lifetime	L90B10, >50000 hrs
Warranty time	5 years
Certification	CE , RoHS

Agricultural lighting FAQ

What ingress protection rating do OLAMLED farm luminaires have?

They are rated IP68 and IP69K. That is why they can be installed in cattle sheds, pig houses, sheep sheds and poultry houses where high-pressure cleaning is routine.

Can the luminaires be cleaned with hot water?

Yes. They withstand hot water washdowns up to 80°C and high-pressure washdowns at 80–100 bar, so hygiene and disinfection routines do not damage the fitting.

What are the end caps and housing made of?

End caps are 304L or 316L stainless steel, and the housing is PC or PMMA. Stainless steel fasteners give long-term rust protection in ammonia-rich air.

Are the luminaires dimmable?

Both dimmable and non-dimmable drivers are available. The driver is specified per project, alongside mounting and connection method.

Can the luminaires be linked in continuous rows?

Yes. Connection modes are linkable and non-linkable, and both surface mounting and suspension are supported.

What warranty and certification do they carry?

The warranty time is 5 years, and the luminaires are certified to CE and RoHS. Rated lifetime is L90B10, over 50,000 hours.

What is the minimum order quantity?

Low MOQ from 1 pc for standard products. OLAMLED also develops molds, packaging design and certification for OEM and ODM projects.

Do you supply grow lights or incubation lamps?

No. These anti-ammonia, waterproof luminaires meet most farm lighting needs, except for growth and incubation lamps.

OEM and ODM for lighting distributors and system integrators

Customize For You

ISO9001:2000 certified factory

Low MOQ From 1pcs

Develop Molds For You

Packaging Design For You

Certification For You

Custom High Quality LED Products Process

See How We’ll Work Together

Discover

Our team learns more about your specific requirements through an in-depth consultation and discovery process.

Define

Based on the detailed information we obtained during the consultation process, we determined the structure, parameters, application scenarios and other related requirements of the project.

Solution

We have prepared an estimated quotation for this project, which includes the required materials and the specific customization work we will undertake.

Contract

We then send you a copy of the contract for approval, signifying our mutual agreement regarding the project.

Prototype

A functional sample will be created for testing, recalibrating the sample for improvements and optimization.

Review

We send you a sample of the project and discuss how it fits your specifications. Any revision requests are taken and implemented until you’re satisfied with the results.